p0404, p0490, p0190 & p0251 on ford mondeo 2.0 tdci 2003 Hi I am owning a ford mondeo (europe) 2000cc tdci 115ps build in 2003. Engine code is either HJBA or HJBB. 278.000km done. I have had some trouble lately with accelerating, mostly around 3000rpm the engine kicks into emergency running, and after overloading the engine, the engine falls out. Ford Focus tdci - Focus focus tdci 1.8 2007 non starter. 2007 focus tdci 1.8 non starter Hi all. First post so be gentle :) I have a mates' focus 1.8 tdci here which is failing to start. Seems to be lack of fuel. Have changed fuel filter and seals and also 4 glow plugs as I'm reading a glow plug fault. Ford Year: 2011. UK/Ireland Location: Nottinghamshire. Posted January 14, 2017. Hi, I while back i had issues with my ford fiesta 1.4 tdci, it turned out that the 3rd injector was faulty. I had bought a full recon set x4 of injectors and the car was running sweet as a nut. I'm planning on selling my old injectors, i know 1 of them is faulty but Hi. i have a problem with my ford focus 2001 1.8 TDCI, it starts very slow..this morning even if there are +20 degrees celcius outside, the car would not start until 3 or 4 tries. the battery seems to … read more 14. Ford Model: Ford Focus 2.0 tdci. Ford Year: 2007. UK/Ireland Location: Gloucestershire. Posted September 27, 2013. if you do remove the injector be carefull to remove and replace the copper washer at the base. It doesnt always come out with the injector, I used a piece of copper wire to hook it out. The injector wont need recoding. 4 - Code the injectors to the Ecu using the injector codes I made note of in step 2. 5 - Try swap the Pats chip from the new key into the existing key and see if it will start the car. If it doesn't, fit the new lock barrel and use the new key with its Pats chip reinserted. On idle they were between 0.9 - 1.08, at 2000 RPM +/- 100 the rates of all cylinders were 1.00000079. Other facts - no problems in starting no matter if it is cold (-13 C) or hot, fuel consumption is normal, I haven't noticed any running issues except very slight RPM oscillation at idle. Posted November 22, 2016. Use Diesel purge, it really works - you basically run it neat through the lines to and from the pump rather than diluting it (although you can add it to the fuel but it isn't as effective), I used some on my 1.4 TDCi at around 105k miles, drove so much better, smoother and quieter. jt8APTw.